Normac Products Product Line Card
| Description |
|
The following is a full listing of all available Normac products. Stated hardness ratings are + 5. |
| Adhesives |
| 600R PLASTIC CEMENT |
| Normac 600R plastic cement is a two component, room temperature curing, urethane dissolved in an acetone/toluene blend of solvents. |  |
| 900 Series |
| 900R COLD BOND ADHESIVE |
| Normac 900R is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
| 900RC COLD BOND ADHESIVE - CLEAR |
| Normac 900RC is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
| 900RF COLD BOND ADHESIVE - FDA COMPLIANT WHITE |
| Normac 900RF is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
| 900E COLD BOND ADHESIVE |
| Normac 900E is an Ethyl Acetate/Cyclohexane based two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
|
900R ULTRA COLD BOND ADHESIVE |
| Normac 900R Ultra is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
|
900E ULTRA COLD BOND ADHESIVE |
| Normac 900E Ultra is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
| XL Series |
| XL-1000 PLASTIC CEMENT |
| Normac XL1000 plastic cement is a two component, room temperature curing, urethane. | |
| XL-2000 RUBBER ADHESIVE |
| Normac XL2000 is a two component, room temperature curing, chloroprene based, liquid rubber adhesive. | |
| Primers |
| EP-100 EPOXY PRIMER - CONCRETE |
| Normac EP100 is a two component, room temperature curing, epoxy based, liquid adhesive. | |
| EP-200 EPOXY PRIMER - CONCRETE |
| Normac EP200 is a two component, room temperature curing, epoxy based, liquid adhesive. | |
| NR-8310 PRIMER URETHANE TO METAL |
| A 1-part polymeric resinous based adhesive for the bonding of the Normac series of sprayable urethanes, castables and trowelable putty systems to ferrous and non-ferrous metals. | |
| NR-8400 PRIMER URETHANE TO RUBBER |
| A 1-part polymeric resinous based adhesive in Ethyl Acetate for bonding of the Normac U-Repair and BR-3TM series of elastomeric repair materials to properly prepared rubber. | |
| NR-8401 PRIMER URETHANE TO RUBBER |
| A 1-part polymeric resinous based adhesive in Ethyl Acetate for bonding of the Normac U-Repair and BR-3TM series of elastomeric repair materials to properly prepared rubber. | |
| NR-9500 PRIMER URETHANE TO METAL |
| A 2-part polymeric resinous based adhesive for the bonding of the Normac series of sprayable urethanes, castables and trowelable putty systems to ferrous and non-ferrous metals. | |
| NR-9600 WASH PRIMER URETHANE TO METAL |
| A 2-part polymeric resinous based wash primer used in conjunction with Normac’s NR-9500 2 part primer system for the bonding of the Normac series of sprayable urethanes, castables and trowelable putty systems to ferrous and non-ferrous metals. | |
| XL-4001 METAL PRIMER RUBBER TO METAL |
| Normac XL4001 is a single component, room temperature curing, chloroprene based, liquid rubber metal primer. | |
| Solvent Based Sprayable Coatings and Additives |
| Additives |
| NR-160 PLASTICIZER |
| A plasticizer for Normac polyurethane systems. Normac NR-160 allows the end user to achieve a lower durometer finished material. | |
| NR-AS14 ANTI STATIC |
| Normac NR-AS14 is a liquid anti-static agent that is added to the mixed portions (A+B) of Normac Solvent Based Sprayable Urethanes to lower it’s electrical resistivity resulting in an “antistatic” cured film. | |
| NR-T10 HIGH BUILD |
| NR-T10 is a thixotropic agent that when added to our solvent based sprayable urethanes, allows the applicator to apply wet film coating thicknesses of up to .040" (1 mm) thick without sagging or runs. | |
| Coatings |
| NR-2S SPRAYABLE URETHANE - 50 SHORE A |
| A solvent based urethane coating used in heavy abrasion situations designed primarily for application by airless spray. It can also be brushed, rolled or dipped. | |
| BR-3S SPRAYABLE URETHANE - 80 SHORE A |
| A solvent based urethane coating used in heavy abrasion situations designed primarily for application by airless spray. It can also be brushed, rolled or dipped. | |
| BR-3SF SPRAYABLE URETHANE - 80 SHORE A |
| A solvent based urethane coating used in heavy abrasion situations designed primarily for application by airless spray. It can also be brushed, rolled or dipped. | |
| BR-3SV SPRAYABLE URETHANE / UV STABLE - 95 SHORE A |
| A solvent based UV (Ultra violet) resistant, colour-fast (non-yellowing) urethane coating formulated for exterior use and as a topcoat over other non-UV resistant coatings. | |
| NR-5S SPRAYABLE URETHANE - 90 SHORE A |
| A solvent based urethane coating used in heavy abrasion situations designed primarily for application by airless spray. It can also be brushed, rolled or dipped. | |
| NR-5SF SPRAYABLE URETHANE - 90 SHORE A |
| A solvent based urethane coating used in heavy abrasion situations designed primarily for application by airless spray. It can also be brushed, rolled or dipped. | |
| NR-7S SPRAYABLE URETHANE - 98 SHORE A |
| Two component, aliphatic ether based coating systems with a Shore Hardness of 98A or 60 on the "D" scale. It is designed specifically for load release of sticky materials. | |
| 100% Solids Sprayable Coatings |
| Polyurethane - General Performance |
| NR-55GL - 55 SHORE A |
| 100% solids plural component, sprayable urethane polymer system. | |
| NR-80GL - 80 SHORE A |
| 100% solids plural component, sprayable urethane polymer system. | |
| NR-90GL - 90 SHORE A |
| 100% solids plural component, sprayable urethane polymer system. | |
| Polyurethane - High Performance |
| NR-45LVHS - 45 SHORE A |
| A 100% solids Heated Plural Component Sprayable Urethane System. | |
| NR-60LVHS - 60 SHORE A |
| A 100% solids Heated Plural Component Sprayable Urethane System. | |
| NR-70LVHS - 70 SHORE A |
| A 100% solids Heated Plural Component Sprayable Urethane System. | |
| NR-80LVHS - 80 SHORE A |
| A 100% solids Heated Plural Component Sprayable Urethane System. | |
| NR-85LVHS-FR - 85 SHORE A |
| A 100% solids, Flame Retardant Heated Plural Component Sprayable Urethane System. | |
| NR-95HT - 95 SHORE A |
| A 100% solids Heated Plural Component Sprayable/Castable Urethane System designed for high temperature resistant applications. | |
| NR-95LVHS - 95 SHORE A |
| A 100% solids Heated Plural Component Sprayable Urethane System. | |
| Polyurea |
| NR-5011D - 45 SHORE D |
| A 100% solids Heated Plural Component High Performance Aliphatic Polyurea Spray System designed for applications requiring ultra violet resistance and colour retention for exterior coating requirements. | |
| NR-5911HT - 60 SHORE D |
| A 100% solids Heated Plural Component Polyurea Spray System designed for applications such as tank linings, ponds, reservoirs and concrete containment areas. | |
| NR-6011 - 60 SHORE D |
| A 100% solids Heated Plural Component Polyurea Spray System designed for applications such as tank linings, ponds, reservoirs and concrete containment areas. | |
| NR-6511D - 60 SHORE D |
| A 100% solids Heated Plural Component High Performance Modified Polyurea Spray System designed for superior chemical and heat resistant applications such as tank linings, ponds, reservoirs and concrete containment areas. | |
| NR-8011 - 85 SHORE A |
| A 100% solids Heated Plural Component Polyurea Spray System designed for applications requiring flexibility and good abrasion resistance such as metals, foams, geotextiles and concrete. | |
| NR-9511D - 50 SHORE D |
| A 100% solids Heated Plural Component High Performance Polyurea Spray System designed for superior chemical and heat resistant applications. | |
| NR-9511FR - 50 SHORE D |
| Normac NR-9511FR is a flame retardant version of our NR-9511D high performance Polyurea coating system. | |
| Castable Urethanes |
| NR-606 - 65 SHORE A |
| Normac NR-606 is a two component polyether based urethane casting system. | |
| NR-806 - 80 SHORE A |
| Normac NR-806 is a two component polyether based urethane casting system. | |
| NR-806P - 80 SHORE A |
| Normac NR-806P is a two component polyether based urethane casting system. | |
| NR-906 - 90 SHORE A |
| Normac NR-906 is a two component polyether based urethane casting system yielding a cured hardness of 90 Shore A. | |
| NR-987 - 72 SHORE D |
| Normac NR-987 is a two component polyether based urethane casting system yielding a cured hardness of 72 Shore D. | |
| NR-1080 - 78 SHORE D |
| Normac NR-1080 is a specialty formulated two component “stripped” polyether based urethane casting system yielding a cured hardness of 78 Shore D. | |
| NR-1085 - 82 SHORE D |
| Normac NR-1085 is a specialty formulated two component “stripped” polyether based urethane casting system yielding a cured hardness of 82 Shore D. | |
| Trowelable Urethane |
| BR-3TM - 85 SHORE A |
| BR-3TM is a 100% solids, trowelable putty grade polyurethane material that when mixed in proper portions, will yield a tough rubbery compound with exceptional abrasion and tear resistance. | |
| Nuclear |
| NR-5S 400 - 92 SHORE A |
| A 100% solids urethane coating designed for application by heated plural component airless spray equipment. It can also be brushed, rolled or conventional spray. | |
| Solvents |
| NR-141-L - FABRIC WASH |
| Cleaning and degreasing solvent for cleaning rubber, urethane and metal prior to bonding and priming operations. | |
| NR-160 SANTICIZER |
| A plasticizer for Normac polyurethane systems. Normac NR-160 allows the end user to achieve a lower durometer finished material. It offers superior physical properties and retention of physicals. Normac NR-160 provides good processing characteristics due to its low viscosity, allowing processing at lower temperatures. | |