Solvent Based Sprayable Urethanes

These systems are available as kits consisting of two components, Part “A” the resin or iso, and Part “B” the curative. They are packaged into kits by weight not volume corresponding roughly to 1 Litre ( Quart) kits, 4 Litre (Gallon) kits, 20 Litre (5-Gallon) kits and 200 Litre (55 gallon drum) kits.

Normac solvent based sprayable urethanes are ideal for those who wish to learn about spraying urethane without the large investment required for 100% solids based urethanes. These products can be applied through inexpensive (US$200.00 to $300.00) gravity fed air spray guns or electric airless spray guns.

The advantage of the solvent based systems is the ability to spray small, hard to reach articles such as vibratory feeder bowls, small diameter pipe, elbows, pumps, and impellors. You can spray as little as 100 grams whereas 100% solids systems are not economical to apply unless the work requires a minimum of 25 gallons or more. This is because the time spent setting up and cleaning the 100% solids system costs more than the work itself. Furthermore the large tip size and pressure required to successfully apply 100% solids materials make spraying small articles all but impossible.

Available Systems

NR-2S.PNG

NR-2S

45 Shore A

NR-5S MEK.PNG

NR-5S MEK

90 Shore A

BR-3SMEK.PNG

BR-3S MEK

80 Shore A

NR-5SF.PNG

NR-5SF

90 Shore A

BR-3SF.PNG

BR-3SF

80 Shore A

NR-5SFG.PNG

NR-5SFG Food Grade

90 Shore A

BR-3SV.PNG

BR-3SV

95 Shore A

NR-7S.PNG

NR-7S

60 Shore D

*Please note all hardness specifications are  ±5.

Normac Adhesive Products Inc. - 1350 Heine Court, Burlington, On, Canada, L7L 6M4

Tel: (905) 332-6455   Fax: (905) 332-6880